MMS Series

Meteor Modular System

Due to state-of-the-art industrial process and control systems Meteor’s coil winding machine type series MMS 110 and MMS 201 offer multiple applications and extensions (upgrades) at an attaractive price performance ratio. Almost all kinds of geometries of coils can be processed on machines with 2 to 16 spindles.

Advantage of the MMS coil winding machine

  • Peak performance at a winding velocity of up to 26‘000 1/min combined with a highly dynamical wire guide system
  • External placement on loading shuttle
  • Reliability in multiple shift production
  • Efficient for medium to large volume production

The MMS Series convinces with further conclusive advantages

  • Operation and Programming
    The Programming is carried out with Meteor‘s customer proven state-of-the-art WINDOWS based modular software. Coordinates are fed through „teach-in“ modus or through computer keyboard. Instructions to operating personal can be stored in plain language and in full length.
  • Solid and sound construction
    The all-welded chassis with integrated electrical cabinet serves as a support for the wire guide system and as support frame for the high speed winding module. The cast iron spindle box ensures a low-vibration run of the coil spindles and and optimal motor performance. All mechanical components are manufactured with high precision in analogy to the machine tool production.
  • Wire guide system
    The stable and sound construction of the wire guide system ensures highest precision in wire guiding.
  • Flexible upgrade possibilities
    The modular construction of the Meteor coil winding machine allows multiple upgrade possiblilties also for automated production lines. Investing into the MMS series is a wise long-term capital investment strategy as its construction always complies with state-of-the-art production requirements.

The MMS Series can be flexibly upgraded by various accessory tools

  • Coil specific winding tools
  • Various equipment types of the wire guide system
  • Cutting and scissor systems to cut wires
  • Outer support bearing
  • Wire insulation stripping device
  • Various park systems
  • Various mechanical and electronical wire drawing control systems
  • Automatic charging and discharging of coils
 -Technical specification -MMS 110 -MMS 201
-Winding spindles -Selective 2 up to 9 -Selective 6 up to 16
-Spindle pitch -55 or 85 mm -55 or 85 mm
-Wire diameter standard -up to 1,2 mm -up to 1,2 mm
-Wire diameter optional -over 1,2 mm on request -over 1,2 mm on request
-Winding width -80 mm -80 mm
-Rotation diameter -50 or 80 mm -50 or 80 mm
-Feed rate max. -300 mm/s -300 mm/s
-Speed range max. -26’000 rpm -26’000 rpm

-Connected load and dimensions
-Power supply -3 x 400 V / 50-60 Hz -3 x 400 V / 50-60 Hz
-Current consumption -16 A -25 A
-Main fuse, by customer -25 A
 -40 A
-Protection class of electr. inst. -IP 54 -IP 54
-Air pressure -5 – 7 bar -5 – 7 bar
-Air consumption -ca. 400 l/min -ca. 400 l/min
-Dimensions W x L x H -ca. 1060 x 2375 x 1700 -ca. 1060 x 2880 x 1700
-Spindle height above floor -1100 mm -1100 mm
-Weight -ca. 1200 kg -ca. 1200 kg

The above data are subject to change

PDF Booklet MMS Series

e-Booklet